FMA LA 5C UHP High Power PEQ 15 CLASS IIIB Infrared IR Laser Illuminator LA5

Description

Due to global
Epidemic
the shipment will be around 2-4 weeks please be patient, if you NOT willing to wait that long please DO NOT place an order!
We will using DHL Express International Service starts March/2021. Shipping lead time will be around 10-14 days (Plus a 3-7 days handling time and the
custom clearance
).
Description:
You are viewing the the best clone LA-5C PEQ-15 Laser Designator made by FMA.
This unit high-end clone with 90% similar compare to the original PEQs.
This laser device is Programmable as real PEQ series with build-in Class IIIB High Power Visible/Infrared Lasers, and adjustable Illumination focal lens.
Each Laser Unit have unique laser engraved serial numbers.
This is the closest clone full-power/high-power PEQ-15 CLONE on the market but if you looking for the robust laser device please purchase the real PEQ-15!
We will NOT accept return of refund UNLESS your device damaged or lost during the shipment! All sales are final! So think carefully before the purchasing!
Operation Warning:
You have been informed that you are purchasing a CLASS IIIB laser product. We are not responsible for the damages caused by using this product in the wrong way and you have been informed of the relevant local laws to ensure that you can own this product in your area. You will automatically agree with this after placing an order!
The laser have the electronic protection program, If you activate the laser for more than 5 mins it will shut down to protect the unit. Simply remove the battery and re-install this will reset the unit and back to work.
DO NOT turn the function switch when the laser is activating.
Physical Spec:
DIMENSIONS: 4.7″(L) x 2.8″(W) x 1.6″(H)
WEIGHT: 7.2 oz. w/o Battery
(Battery NOT Included)
POWER: One (1) 3V 123A Battery
BATTERY LIFE: >3 Hours (Dual High)
WATERPROOF: Drizzle (OK), Submerge (NO)
SHOCKPROOF: Tested on point two-two-three Rem semi (YES)!
IR LASER SPEC:
IR LASER CLASS: 1 (Low), IIIB (High)
IR LASER OUTPUT: 0.5mW (Low), 25mW (High)
IR LASER BEAM: 0.5 mRad Divergence
IR LASER WAVELENGTH: 820nm – 850nm
IR LASER RANGE: >600 Meters (Low), 2,000 Meters (High)
VISIBLE LASER SPEC:
VISIBLE LASER CLASS: IIIR (Low), IIIB (High)
VISIBLE LASER OUTPUT: 5mW (Low), 20mW (High)
VISIBLE LASER BEAM: 0.5 mRad Divergence
VISIBLE LASER WAVELENGTH: 625nm – 660nm
VISIBLE LASER RANGE (HIGH): >150 Meters (Day), 2,000 Meters (Night)
IR ILLUMINATOR SPEC:
IR ILLUMINATOR CLASS: IIIR (Low), IIIB (High)
IR ILLUMINATOR OUTPUT: 2.5mW (Low), 56mW (High)
IR ILLUMINATOR BEAM: 1-105 mRad Divergence
IR ILLUMINATOR WAVELENGTH: 820nm – 850nm
IR ILLUMINATOR RANGE: >600 Meters (Low), 4,000 Meters (High)
PROGRAMMING:
From the ATPIAL Quick Reference Guide:
Pulse Mode:  The IR illuminator may be programmed to operate in pulse mode as follows:
With the mode selector turned to P (PROGRAM) position, hold down the activation button.
Turn the mode selector to the desired pulse rate as shown in the table below (When holding down the activation button).  The rate will display on the LED status indicator (LED will blink same number of times as the pulse rate).
Release activation button and pulse rate will be programmed.  The set pulse rate will remain until programmed differently.
Pulse Rate–––––––––––––––––––––––––––––– IR Mode Selector Position
Program––––––––––––––––––––––––––––––––––––––­–-P
Continuous (no pulse)––––––––––––––––––––––––––––-AL
1 pulse per second–––––––––––––––––––––––––––––-– DL
2 pulses per second–––––––––––––––––––––––––––––-AH*
4 pulses per second–––––––––––––––––––––––––––––-IH*
8 pulses per second–––––––––––––––––––––––––––––-DH*
*Blue safety screw must be removed to program these pulse rates.
ETA: If you do it right, the LED indicator should flash amber 3 times. If you met any malfunction please try to re-program the device to the factory setting (AL-no pulse mode).
PACKAGE INCLUDES:
Plastic Case
Laser Unit
Manual
Cable Switch
Pattern Generator (5pcs)
2 set stickers